Enter the Vintimber production workshop
Many friends have asked us in the chat: "Why do the furniture of Vintimber feel so different from others?" Today, we won't talk about marketing or showcase case studies. Instead, we'll take you into our production workshop to see how an ordinary piece of solid wood undergoes numerous meticulous processes before it becomes the warm furniture in your home. Step 1: Selecting wood - We only choose "the right" ones, not "expensive" ones.
Every morning, the first thing the workshop masters do is not to start work, but to "spot-check" the piles of logs that have been stacked up like small mountains. We do not use "full automation screening" when selecting wood; instead, the masters wear gloves and carefully examine the wood fibers and cross-sections one by one: they avoid using wood with wormholes, cracks, or even small blemishes as big as a fingernail, as long as they affect the stability, they will directly classify them as "waste materials". For the same batch of furniture, wood of similar age must be selected - for example, when making a dining table, it is necessary to ensure that the grain patterns on the tabletop are consistent, so that the finished product will not deform due to differences in wood density. For areas that are frequently touched, such as sofa armrests and desk tops, the "core material" of raw wood - with higher density and a smoother texture, and a natural warm feel when touched - will be used. Last month, there was a batch of walnut wood. The supplier said "minor flaws do not affect usage", but we still returned it - to Vintimber, "the difference between 'usable' and 'good to use' lies in the sense of responsibility towards the users."
Step 2: Cutting - "Slow down" is to ensure "stability for ten years". The selected logs are transported to the cutting area. Here, there is no noise of "rapid cutting", only the figures of the masters repeatedly comparing against the drawings. For example, when making the frame of a solid wood bed: 1. First, determine the cutting angle based on the "texture direction" of the wood - cutting along the wood grain makes the wood less prone to cracking and is easier to polish later; 2. The size of each board must be 2 millimeters larger than the design drawing - it's not because the master's hands are shaking, but to precisely control the "millimeter-level" fit during subsequent polishing and painting; 3. The cut materials are not directly sent to the next step but are neatly stacked in the ventilation area for 3 days - allowing the wood to adapt to the temperature and humidity of the workshop and releasing stress in advance to avoid deformation when you bring it home due to environmental changes. A young master who just arrived thought it was "too slow", and the factory director said, "You are spending 10 more minutes now, and the bed in the user's home can be used stably for ten years. Is it worth it?" Now he has become the person who is the most "slacking" in the cutting area. Step 3: Polishing - 6 rounds of sandpaper, making it "like baby skin" - If selecting wood is "selecting the foundation", then polishing is to "do the skin" for the furniture. Our polishing never uses machines to "solve it all at once", but is done purely by hand in 6 rounds: The first 2 rounds use coarse sandpaper to remove the burrs and cutting marks on the surface of the board; For the middle part, use medium-grit sandpaper twice to smooth out the "edges" and "corners" at the corners and seams - for example, the handles of the drawers should be smoothed until there is no uncomfortable sensation when your fingers touch them. For the last two rounds, use fine sandpaper. The masters will "lightly push and slowly grind" along the wood grain, and even use the back of their hands to rub - "It should be like touching your own child's face. There should be no roughness at all, that's considered a success." Last week, a customer came to the workshop for a visit and touched the newly polished bedside table. He said, "I don't want to apply paint and just want to take it home." - This is probably the best compliment for the masters. The final step: Painting - Select "environmentally friendly water-based paint that allows breathing" and apply it to the home to provide much more peace of mind. Many users who buy solid wood furniture are most concerned about the "smell", especially if there are elderly or children in the house - In the lacquer area with the heavenly wood fragrance, you can't smell a single pungent paint smell, only the faint fragrance of the wood. The secret is that we insist on using environmentally friendly water-based paint. Compared to ordinary paint, our water-based paint process is more "precise", but for the peace of mind of users, all these troubles are worth it: Before painting, do a "base material cleaning" first: The masters use dry cotton cloths to repeatedly wipe the dust from the polished surface of the board, even the fine dust in the gaps must be blown clean - Water-based paint has high requirements for the base material, and even a little dust can affect the adhesion and feel; ; Apply in three thin coats, and each coat must dry for 4-6 hours before the next one is applied: Unlike paint which can "be applied thickly and dry quickly", water-based paint needs to be "applied thinly in multiple layers" - this way, the paint film is more uniform, and it can reveal the natural texture of the wood. It feels "smooth and fine with a matte finish", rather than "slick and shiny". ; After the final drying process, a fine sandpaper should be used to gently "polish" the surface: remove the tiny particles on the paint layer to ensure that it feels as smooth and gentle as the polished wood, even in areas like the edges of the dining table or the handles of the wardrobe, where they are touched frequently, there will be no roughness. Once, a mother customer brought her furniture home on the same day and dared to let her child play on the wardrobe - she said, "If you lean close and smell, there's no smell at all. This is a reassuring piece of furniture." This statement made us feel much more at ease than any praise could. When we walked out of the workshop, we happened to encounter the logistics staff loading the goods - it was a dining table and chair for a customer in Hangzhou. The staff carefully wrapped it with three layers of bubble wrap and attached a "light placement" label. In fact, for us, each piece of furniture is not a "product", but a "piece of reassurance" handed from the workshop workers to the customer's home. If you have Vintimber furniture at home, you might as well carefully touch its surface - there are our meticulous choices of wood, the patience during the polishing process, and the insistence on "giving every home the temperature of solid wood".